Current location:Home  > Products  > Amplifier  > MVP Series

MVP Series

Model List
Product Description

A professional and mid-high level SMPS power amplifier, is famous for its stability, high-efficiency and light weight

The three models within this series (MVP4000, MVP6000, MVP8000) offer a range from 400 watts to 800 watts at 8Ω stereo. Each channel works at 2Ω to satisfy all requirements.

MVP series adopts Audiocenter latest Class H+ circuit to eliminate the Class H cross switching distortion.

MVP series adopts carefully selected components like audiophile Wima capacitors, Toshiba transistors, Neutrik® connectors and Belden audio cables, etc. High voltage signal and low voltage signal are allocated separately for better performance. The power supply part is covered with steel shield. High quality materials and technology ensure very clean and clear sound and high damping factor. This makes MVP series suitable for many different kinds of application, from high power loudspeakers to critical monitoring where crystal clear highs are mandatory. It is widely used in fixed installation and touring performance such as bar, nightclub, multi-functional hall, museum, ball room, wedding, etc.

  • Features
  • Specifications
  • Core components
  • Applications
  • Download

A-Guard Protection System


A-Guard is Audiocenter comprehensive protection system which includes optimized limiter circuit. Unlike other solutions which depend on separate circuits to address different problems, A-Guard was developed as centralized solution where all protection requirements work together in perfect harmony. A-Guard is only applied when it’s necessary to protect the amplifier. This is the reason why MVP amplifiers are able to sustain full power output even under complex capacitive loads.

 

Smart Overheat Management


The smart overheat management of MVP series adopts unique circuitry to monitor the amplifier’s temperature in real time. When the safe operation of the amplifier is compromised, the output power is reduced but not shut down, which ensures the system can work stably in high temperature environment.

 

Class H+ Circuit Design Eliminates Cross Switching Distortion


MVP series adopts Audiocenter latest Class H+ circuit to eliminate the Class H cross switching distortion. The result is the same low distortion as Class AB. All MVP amplifiers have less than 0.05%THD at 16KHz and the sound is so clean and natural. 

SPECIFICATIONS

MVP4000

MVP6000

MVP8000

Rated Power (20Hz-20KHz, <0.1%THD)

4Ω bridge

1600W

2200W

3200W

8Ω bridge

1200W

1700W

2400W

2Ωstereo

2×800W

2×1100W

2×1600W

4Ωstereo

2×600W

2×850W

2×1200W

8Ωstereo

2×400W

2×560W

2×800W

A-Guard Protection System

DC protection

Short circuit protection

Smart overheat management

 Overheat protection

Input overload protection

Output overload protection

Soft startup protection

Limiter protection

Up to 9V

Frequency Response(1W 8Ω stereo)

20Hz-20KHz(±0.5dB)

Sensitivity

0.775V/32dB/26dB

0.775V/36dB/32dB

Connectors

Input

 Neutrik® male XLR & Female XLR

Output

2×NEUTRIK® Speakon NL4MP

Filter Capacitor Capacity

2200μf/200V×4

2200μf/200V×6

Input Impedance

Balanced

20KΩ

Unbalanced

10KΩ

Crosstalk(20Hz-20KHz, rated power 8Ω)

>60dB

S/N Ratio(Rated power 8Ω, A weighted)

≥108dB

Damping Factor(1KHz & 8Ω)

>500

Intermodulation Distortion(20Hz-20KHz, half power)

≤0.05%

Total Harmonic Distortion(20Hz-20KHz, rated power 8Ω)

≤0.05%

Phase Response(1W & 8Ω, 20Hz-20KHz)

20Hz+4°  20KHz-12°

Slew Rate

≥45V/μs

Output Circuitry

Class H+

Power Consumption(Dual channel driven 4Ω, 1/8RMS/230V)

1.8A

2.4A

3.3A

Rack Space

2U

Cooling

Front to back venting, mandatory cooling

Dimensions(W×H×D)

483×88×456mm

Net Weight

14.0kg

14.5kg

Technical Support and After-sales Service

Global application support team 

MVP Product catalogue

Download

MVP Product advertisement

Download

MVP Product pictures

 Download

 

 

 

 

 

 


Facebook
Twitter
Youtube