Current location:Home  > Products  > Amplifier  > VIN16

VIN16

Model List
  • VIN16
Product Description

A professional and high-end SMPS four channel power amplifier with Class TD circuit design, is famous for its stability, high-efficiency, light weight and high power.

Class TD circuit design has the same high efficiency as digital amplifier, but with much better sound performance.

VIN16 features four channel models Ch-A, Ch-B, Ch-C and Ch-D. It can operate on three different configurations: STEREO, PARALLEL, or BRIDGE. The PARALLEL channel mode includes Ch-AB, Ch-ABC and Ch-ABCD, and the BRIDGE channel mode includes Ch-AB BRIDGE and Ch-CD BRIDGE.

VIN16 adopts carefully selected components like audiophile WIMA capacitors, RUBYCON capacitors, NEUTRIK connectors and BELDEN audio cables, etc. High voltage signal and low voltage signal are allocated separately for better performance. The power supply part is covered with steel shield. High quality materials and technology ensure very clean and clear sound and high damping factor. This makes VIN16 suitable for many different kinds of applications, from big power loudspeakers to critical monitoring where crystal clear highs are mandatory. It is widely used in concert, stadium, entertainment center and theater, etc.

  • Features
  • Specifications
  • Core components
  • Download

A-Guard Protection System

A-Guard is AUDIOCENTER comprehensive protection system which includes optimized limiter circuit. Unlike other solutions which depend on separate circuits to address different problems, A-Guard was developed as centralized solution where all protection requirements work together in perfect harmony. A-Guard is only applied when it’s necessary to protect the amplifier. This is the reason why VIN16 amplifiers are able to sustain full power output even under complex capacitive loads.

With Intelligent Signal Limiter technology, VIN16 can operate when input the signal from 0V to 8V, by effectively limiting the signal.

VIN16 is with SMD (Surface Mounted Devices), which makes the circuitry transmission distance shortest, eliminates interference and improves audio performance. Besides, manual interference is reduced for reliability and stability.

For power supply part, AUDIOCENTER uses high-efficient power supply with PFC (Power Factor Correction) without any compromise on cost. This decreases electric current for power supply circuitry and eliminates harmful harmonic current, which can meet the electric industry requirement for power factor in Europe and America. It is an innovation in professional amplifier field.

VIN16 adopts terminal feedback technology and multi-point network absorption circuitry developed by AUDIOCENTER, which makes the damping factor up to above 2000. This makes it easy to drive 18” or 21” subwoofer with natural and dynamic sound.

Rated Power(20Hz-20KHz,<0.1%THD)

4×1600W@8Ω stereo

4×3000W@4Ω stereo

2×6000W@8Ω bridge

A-Guard Protection System

DC protection /Short circuit protection /Smart overheat management /Overheat protection /Input overload protection /Output overload protection /Soft startup protection / Limiter protection Up to 9V

Frequency Response(1W 8Ω stereo)

20Hz-20KHz(±0.25dB)

Sensitivity

0.775V / 36dB / 32dB

Input Connectors

Output Connectors

NEUTRIK® male XLR & female XLR

4×NEUTRIK® Speakon NL4MP

Filter Capacitor Capacity

1500μf / 450V×16

Input Impedance

Balanced 20KΩ/ Unbalanced 10KΩ

Crosstalk((20Hz-20KHz,Rated power 8Ω)

≥116dB

S/N Ratio(Rated power 8Ω,A weighted)

≥110dB

Damping Factor(1 KHz8Ω)

>2000

Intermodulation Distortion(20Hz-20KHz,half power)

≤0.015%

Total Harmonic Distortion(20Hz-20KHz,Rated power 8Ω)

≤0.015%

Phase Response(1W8Ω, 20Hz-20KHz)

20Hz+4° 20KHz-12°

Slew Rate

≥60V/μs

Output Circuitry

Class TD

Power Consumption(Dual channel driven 4Ω,1/8RMS/230V)

13A

Rack Space

2U

Cooling

Front to back venting, mandatory cooling

Dimension (W×H×D)

483×88×460mm

Net Weight

13.0Kg

VIN16 Product catalogue

Download

VIN16 Product pictures

Download

 

 

 

 

 

 


Facebook
Twitter
Youtube